ISK Matrix Pro eCig Telescopic Variable Voltage System Vaporizer (eLiquid)
The Matrix Pro by ISK features a telescoping battery mod with a GS H4 atomizer for exceptionally smooth hits with no leakage. The telescoping feature allows it to accept 18350, 18500, and 18650 batteries, while the variable voltage feature allows you to switch from 4v, 4.5v, and 5v for the optimal vape.
5 times on/off button protect system
Reverse battery installation protection system
Short circuit protect system
Requires 1 18350, 18500, or 18650 battery (Not Included)
Variable Voltage from 4v (red), 4.5v (blue), 5v (purple)
1 Matrix Battery Mod with GS H4 Atomizer
NOTE: 18350, 18500 or 18650 battery NOT included.
How to Charge the Matrix-Pro:
The Matrix uses replaceable&rechargeable 3.5V Lithium batteries to avoid damage to your Matrix. It takes 4-5 hours to charge the battery.
To charge the batteries, please put the battery into the charger or gently screw battery into USB charger. The battery should flash to show it is charing. The light would be RED when charging and GREEN when fully charged.
Only use the dedicated Wall/Usb charger provided to avoid damaging.
Use high voltage port to charge battery properly.
Charge the battery fully before using to maintain a good battery life.
Do not store the battery under hot or humid condition.
How to Use the Matrix-Pro:
1.Screw the cap from body, and put the battery in it.
PS: Attention “+” and “-“. The “+” inside.
2.After put battery in it, the button led will flashing.
PS: remind the e-cig has ready to work.
3. Press 5times to open,then 5times red led color(3.5v)/then 5times to purple led color(4.0v)/then 5times to blue led color(4.5v).
PS: you can use difference atomizer resistance accoridng to your demand and voltage.
4.Press the button to smoke.
PS: the press button time over 15s, the e-cig will stop to work and close by itself. Then press 5times to open.
5.When the voltage below 3.5V. the LED light will flashing 40time.
PS: Remind you the battery no power, need to charge.