Hamilton Devices PS1 Dual Cartridge and Concentrate Bubbler

$ 74.99
Color

We present today yet another ambitious wax product from Hamilton Devices, the PS1. If you're familiar with Hamilton, you are aware they live by the "Two heads are better than one" proverb. This unit utilizes dual 510 thread ports, allowing two Hamilton Wax Coils (included) or other 510 thread coils to be plugged in and vaped. Once filled, the bubbler can be placed over the coils to form a complete seal, allowing air to pass through. Users can choose between low, medium, and high power output to tune in their hit.  It boasts a 1100mAh battery capacity. Attention has been paid to ensure quality circuitry and various battery protections. 

MAINTENANCE TIPS: Any device dealing with oils has the potential to leak and general cleaning maintenance will keep the device at its optimal performance.

RECOMMENDED CLEANING: 1-2x per battery charge or depending on usage with a Q-Tip and rubbing alcohol.

RECOMMENDED BUBBLER CLEANING:
 Clean with an alcohol swab, cotton round, or Q-Tip in rubbing alcohol. Remove o-ring, cover the holes, and shake with rubbing alcohol. Immediately after, shake with dish soap and water and dry accordingly.

RECOMMENDED PLASTIC HOUSING CLEANING:
 Clean with an alcohol swab, cotton round, or Q-Tip in rubbing alcohol. DO NOT submerge the housing unit in rubbing alcohol. Immediately after, clean with dish soap and water any dry accordingly. DO NOT USE ACETONE OR SOLVENTS FOR CLEANING, ONLY RUBBING ALCOHOL.

Replacement Coils are available.

Features
Dual CCoil Battery
Single Coil Output Mode
Water Bubbler

Specifications
1100mAh Battery
Variable Voltage
Low = Blue (3.2V), Medium = White (3.6V), High = Red (4.0V)

In The Box
1 PS1 Battery
1 Bubbler Attachment
2 Wax Coils
1 USB Charger

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
J
John Adrian
Nice device

I don’t see how you can not make your cartridges pop from having to clear them because of how high the wattage is it’s too hot and the coils are fine for dabs I just wish they had a 3d chamber since you don’t have a option to use a terp perl or spinner cap like you can with rigs and I have been using plenty of Q tips but the coils still stained so I had to put some iso and qtips and leave it in over night and that worked better

You recently viewed

Clear recently viewed