The Core 2.0 E-Rig Kit by Crossing
The Core 2.0 is a triumph of engineering. Crossing took what they learned from the original Core and set to work making improvements. The Core 2.0 is designed to be used with the new RDA V5 Ceramic Heaters. These have the heater integrated into the ceramic of the coil so you get ultra clean taste. You can still use the coils from the original Core as well. There are 4 heat settings and all are optimized for the V5 heaters.
The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time.
Blue – 12.5 second pre-heat – Approx. 400°
Green – 13 second pre-heat – Approx. 425°
White – 17.5 second pre-heat – Approx. 465°
Red – 22.5 second pre-heat – Approx. 500°
The single button design makes using the Core 2.0 a breeze.
Hold – Manual fire up to 60 seconds
Two clicks – Activate session mode – One click to cancel
Three Clicks – Change heat setting
Four Click – Display power level – Red/Low – White/Medium – Green/Full
Five Clicks – Lock or unlock Core 2.0 Base
Replacement Glass, Replacement Heaters, and Replacement Silicone are all available separately.
Vortex Airflow Aluminum Carb Cap
Borosilicate Glass Bubbler
Isolated Aluminum and Glass Vapor Pathway
Battery Capacity: 3150mAh
Battery Charge Type: USB-C
Battery Charge Time: ~1 hours 45 minutes
In The Box
1 Core 2.0 E-Rig Base
1 Core Borosilicate Bubbler
1 Aluminum Spinner Carb Cap
1 Carb Cap Tether (Black)
1 Silicone Base Cover (Black)
1 Atomizer with V5 Heater Pre-Installed
1 Spare V5 Heater
1 SS316 Dab Tool
4 Spare Atomizer Screws
2 Spare Carb Cap Tube O-Rings
1 USB-C Charging Cable
1 Wall Plug